Installation and Connections WebRelay Users Manual
2.1.2 DIN-Rail Mounting
The WebRelay can be mounted to a standard (35mm by 7.55mm) DIN-Rail. Attach the WebRelay to the
DIN-Rail by hooking the top hook on the back of the enclosure to the DIN-Rail and then snap the bottom
hook into place. To remove the WebRelay from the DIN-Rail, use a flat-head screwdriver. Insert the
screw driver into the notch in the release tab and pry against the enclosure to release the bottom hook.
Page 14 Xytronix Research & Design, Inc.
To Next Page
Loading...