WebRelay Users Manual
3.1.5 Control Page Setup (When Relay Mode is set to Standard)
Once the WebRelay is set up, it can be controlled and monitored using a web browser by accessing its
control page. Titles, colors, and basic contents of the control page can be customized by setting the
appropriate options on the ‘Control Page Setup’ page. Note that this setup page only affects the control
web page and does not affect the function of the WebRelay in any way. This section describes the
Control Page Setup page when the relay mode is set to Standard. The next section describes the setup
page for Automatic Reboot mode.
Xytronix Research & Design, Inc. Page 49
To Next Page
Loading...