Web Server and Setup Pages WebRelay Users Manual
opposite of input, and remote command equals local relay. If any of the other ‘Remote Relay
Options’ are selected, the state will not be transmitted.
Note: When units are set up to require a control password, this password must be sent each time the
state is updated. When the option is selected to transmit the state of the input each time the keep alive
message is sent, the password will be frequently transmitted over the network. This may not be a
problem, but the user should be aware that the more often the password is sent, the more opportunity
hackers would have to capture the password, decode it, and potentially use it to control the remote relay
(especially in public networks such as the Internet).
Page 48 Xytronix Research & Design, Inc.
To Next Page
Loading...