ControlByWeb WebRelay X-WR-1R12-1I5-5 - Page 76

Appendix D: Specifications WebRelay Users Manual
X-WR-1R12-1I5-I and and X-WR-1R12-1I5-5 and X-WR-1R12-1I5-E
Input Current (Iin): 4mA @ 4V, 16mA @ 12V
Vin: 4-12 VDC
X-WR-1R12-1I24-I
Input Current (Iin): 3.2mA @ 11V, 8.2mA @ 26V
Vin: 11-26 VDC
Input Functions: Monitor, local relay control, remote relay control
Input to Local Relay Settings: Equal, invert, toggle, latch, pulse, none
Input to Remote Relay Settings: Equal, invert, toggle, latch, pulse, none
Connectors:
Power/Input: 5-position, removable terminal strip, 3.81mm terminal spacing
(Replacement part number, Phoenix Contact 1803604)
Relay: 3-position, removable terminal strip, 7.62mm terminal spacing
(Replacement part number, Phoenix Contact 1767012)
Network: 8-pin RJ-45 socket
Relay Connector Specifications:
Type: 3-position, removable, 7.62 mm (.30”) pitch
Connection wire: Use wire rated for 95ºC (min) for field wiring connections to the relay
terminal block
(MTW Machine Tool Wire rated for 105ºC is recommended)
Stripping Length: 7mm
Connection capacity: 2.5mm
2
stranded, 2.5mm
2
solid
Conductor minimum: 30AWG (UL/CUL)
Conductor maximum: 12 AWG (UL/CUL)
Conductor Type: Copper
Tightening torque: 0.5 Nm min, 0.6 Nm max, (5.0 lb-in)
Power Connector Specifications:
Type: 5-position, removable, 3.81 mm pitch
Connection wire: Use wire rated for 75ºC (min) for connections to the terminal block
Stripping Length: 7mm
Connection capacity: 1.5mm
2
stranded, 1.5mm
2
solid
Conductor minimum: 30AWG (UL/CUL)
Conductor maximum: 14 AWG (UL/CUL)
Conductor Type: Copper
Tightening torque: 0.22 Nm min, 0.25 Nm max, (2.2 lb-in)
Network
10 Base-T or 100 Base-T Ethernet IPv4 (10 Mbit/s or 100 Mbit/s)
Static IP address assignment, TCP port selectable, (DHCP is not supported)
Standard 8-pin RJ-45 modular socket
Supports Web Browser (HTTP), XML, Modbus/TCP protocols
LED Indicators (7)
Digital Input: On
Relay coil: On
Network: Linked
Network: Activity
Page 76 Xytronix Research & Design, Inc.