ControlOMatic PoolWarden - Maximum Electrical Specifications; Models and Options; Certifications

PoolWarden Manual www.poolwardentraining.com 530-205-4520 6
Maximum Electrical Specifications
ITEM DESCRIPTION LIMIT
Input Voltage Maximum input AC voltage 220 VAC, 50-60 Hz
Input Current Maximum input current 10 A
Relay Voltage Maximum relay voltage 220 VAC
Relay Current Maximum Relay Current 2.5 A
Temperature Minimum/Maximum Operating Temperature 30/110 °F
Standby Current Maximum operating current 0.1 A Max
pH Measurement of pH 4.22 to 9.98
ORP Oxidation Reduction Potential 0 to 999 mV
Temperature Water temperature measurement. 32 to 122 °F
ITEM DESCRIPTION
PW-XFC PoolWarden controller with flow cell and sensors
PW-XFC-P
Add 2 pigtails per pool for easy connection of external feeders
PW-XFC-PE Add 2 pigtails per pool and Ethernet communication
PW-XFC-E Add Ethernet communication
PW-XMTD
PoolWarden controller with flow cell and sensors pre mounted on white back panel
PW-XMTD-P Add 2 pigtails per pool for easy connection of external feeders
PW-XMTD-PE Add 2 pigtails per pool and Ethernet communication
PW-XMTD-E Add Ethernet communication
TrueDPD
Adds free chlorine measurement using the DPD colorimetric method. This is available
as a single and dual sensor.
X In the above model numbers, replace the x for S (Single pool) or D (Dual Pool)
Certifications
Models and Options
4010758
Conforms to
UL STD 1563
Certified to CSA STD
C22.2 No. 218.1
NSF/ANSI 50 - Equipment for
Swimming Pools, Spas, Hot
Tubs and Other Recreational
Water Facilities
http://info.nsf.org/Certified/Pools/Listin
gs.asp?Company=C0214550&Standar
d=050&