To Next PageTo Next Page
Need help?Do you have a question about the ControlOMatic POOLWARDEN Plus and is the answer not in the manual?
Lists and describes the key components of the PoolWarden/MiniWarden system.
Details the differences and shared features between PoolWarden and MiniWarden Plus versions.
Describes the function of each key on the MiniWarden and PoolWarden keyboards.
Guides users on how to input and save values using the keyboard.
Defines the column headers found on the default readings screen.
Describes the current measurements and status for Pool 1.
Details the symbols and meanings of relay status indicators.
Lists the main menu categories like Service, TrueDPD, Relays, Internet, etc.
Explains how to access daily noon data, past data, and enter measurements.
Provides details on relay status, on-time, and count for troubleshooting.
How to manually control individual relays for testing or specific operations.
Step-by-step guide for calibrating pH, ORP, and temperature sensors.
Details the specific settings for pH relays, including setpoints and timing.
Lists manual time, control span, setpoint, and timing parameters for ORP relays.
Sets alarm limits based on absolute sensor values (high/low).
Configuration for sending data packets to the data server at specified intervals.
Selects between English or Metric systems for temperature display.
Resets all controller settings back to their factory default values.
Configuration for controlling heaters or chillers based on temperature setpoints.
Instructions for cleaning pH and ORP sensors to ensure proper operation.
Information on sensor lifespan, warranty, and indicators for replacement.
Addresses issues with the flow sensor not being detected correctly.
Helps diagnose inaccurate ORP and pH sensor readings, often due to wiring.
Lists the key features and benefits of the TrueDPD free chlorine measurement option.
Step-by-step instructions for preparing and filling the DPD reagent bottle.
Describes Remote Data Server (RDS) and Local Data Server (LDS) connection methods.
Details firewall port requirements for accessing the Remote Data Server.
Steps to assign a static IP address for direct controller connection.
Describes the main screen of the Local Data Server interface.
General| Brand | ControlOMatic |
|---|---|
| Model | POOLWARDEN Plus |
| Category | Controller |
| Language | English |
