Manuale di Istruzioni
Instruction Manual
58-E4800 Rev. 4 EN 21/05/2012
The following table lists those parts of the equipment that may present some
residual risks for the safety of the personnel if the instructions provided in this
manual are not duly followed.
itter) and relative cable in case the instrument is
switched on without previously connecting the emitter probe head,
caused by the high tension (at very low Energy). Always connect the
probe head before switching on the instrument also ensuring that the
cable is not damaged.
Areas around compartments that contain electrical parts
To Next Page
Loading...
Need help?
General