EasyManuals Logo

Controls 58-E4800 User Manual

Controls 58-E4800
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Manuale di Istruzione
Instruction Manual
21/05/2012 58-E4800 Rev. 4 EN
8
Here follows a list of all WARNINGs present in the manual; please see relevant chapters
for full details on each related safety issue.
WARNING:
We recommend that the user carries out the checks listed in the chapter on maintenance
before each work period. If any anomalies are noted, immediately inform an authorized
technician in merit.
WARNING:
High voltage (at very low Energy) is present in the EMITTER connector of the
instrument, the cable must be connected before switching on the instrument. This voltage
could be dangerous for the user. Also ensure that the cables are not damaged.
WARNING:
Failing to perform the recommended maintenance actions or maintenance performed by
unauthorized people can void the warranty.
CONTROLS will not be responsible for maintenance and service actions performed by
unauthorized people.
WARNING:
Avoid pouring water, even accidentally, or other liquids into the device, as this could
cause short circuits. Before cleaning the device, disconnect it from the mains line.
WARNING:
Never try to open the batteries. Do not recharge damaged batteries.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Controls 58-E4800 and is the answer not in the manual?

Controls 58-E4800 Specifications

General IconGeneral
BrandControls
Model58-E4800
CategoryTest Equipment
LanguageEnglish