CONTROLS, INCORPORATED
CONTROL SYSTEMS & SOLUTIONS
- 2 -
1) Introduction
1.1 The EMGRT1 is a microprocessor-based controller for industrial electronic engines with J1939 CAN Bus. It
is based on the Controls, Inc. 1410-000 series controller platform with Motorola/Freescale processor.
1.2 The product is housed in an 8”W x 8”H x 4”D polycarbonate enclosure that is rated NEMA 4X. The
controller is plug & play with all engine and accessory connectors incorporated into the enclosure.
1.3 The backlit digital display is 1”H x 4”W with two rows of 16 characters. Character height is approximately ½”.
1.4 The controller is manual and auto start capable. Auto start and stop can be via:
1.4.1 Single Float
1.4.2 Dual Float
1.5 Controller specific inputs/alarms are available for E-Stop (Digital), Fuel Level (Analog) with corresponding
engine shutdown, LED illumination and digital display message.
1.6 Controller is independent and does not require connection to a laptop computer to change programmable
settings.
To Next Page
Loading...
