ASSEMBLING THE PARTS
Cap: it must always be fitted into the lid except when
stated otherwise in the recipe� Turn it in a clockwise
direction to secure�
The cap can become very hot in the cooking mode.
Make sure you hold it by the central black plastic part.
Temperature sensor
Induction hot plate
Watertight lid seal: always make sure it is correctly
slotted into the rim of the lid�
Double-wall metal bowl
Universal blade
Screw (fits on underside of the bowl)
Open
Open
Blade
See p� 14
Closed
Closed
Glass lid:
Assembly
Begin by attaching the blade (see p�15)�
Next, lock the bowl into position, followed by the lid (with its
watertight seal), then the cap� The appliance will only work
if the bowl and lid are correctly locked into position�
Simply follow these steps in reverse order to take them
apart�
14
Make sure you regularly check the seal for damage. If it is damaged or leaks, it must
be replaced immediately.
To Next Page
Loading...