What to do if my CookTek Cookers has no power?
If your CookTek Cookers has no power, check the following: * Ensure the unit is plugged into an appropriate receptacle. * Make sure the receptacle is energized. * Check wall switches. * Check the circuit breaker. * Plug a different electronic device into the receptacle to confirm power is present.
What to do if my CookTek ISW061 Cookers pan does not heat?
If your CookTek Cookers pan isn't heating, ensure you're using an induction efficient pan. Also, check that the pan is centered on the heating surface.
Why does my CookTek ISW061 Cookers soup well suddenly stop heating?
Your CookTek Cookers soup well might stop heating due to a power brown out; ensure proper voltage/power levels. Also, ensure the unit isn't sharing a circuit with other electrical devices besides CookTek soup well units. The safety shut-off will engage if an empty pan is left on the soup well surface while the unit is working at full power. Make sure that the dry well surface is clear and wait 15-20 minutes for the unit to reset.
What to do if my CookTek Cookers pan does not get hot enough?
If your induction efficient pan isn't getting hot enough on your CookTek Cookers, be sure you are not using an extension cord. Also, make sure the soup well is not sharing a circuit with other electrical devices.
Proper grounding reduces the risk of electric shock. Use a 3-prong grounding plug.
Ensure the power cord is firmly attached before plugging in.
Explains the function of Power, Lock, Up/Down buttons and display.
Details the physical layout of the control panel with buttons and LEDs.
To Next Page
General