CookTek ISW061 - Preparing Your Cooktek Induction Soup Well Unit For Use; Grounding Instructions; Before You Begin; Electrical Installation Requirements

Manual ISW06x 14161_A USINTL
2
Beforeoperatingyourinductionsoupwell,dothefollowing:
• Remove all packing material and save for subsequent shipment or in case of
concealed shipping damage.
• Keepunitawayfromotherheatsourcesandallowatleast2”(51mm)betweenall
sidesofthehousingandanysurfaceorobstacle,and6”(152mm)betweenthe
bottomofthehousingandanysurfaceorobstacle.Ifeithertheairintakeorexhaust
outlet is blocked, the internal temperature will rise, causing an error code to occur.
Grounding Instructions:
Thesoupwellmustbeproperlygrounded.Intheeventofanelectricalshortcircuit,
groundingreducestheriskofelectricshockbyprovidingasafepathfortheelectric
current.Thesoupwellhasapowercordwitha3-pronggroundingplug,whichmust
beusedinacompatibleandproperlygroundedoutlet.Itistheowner’sresponsibility
toreplaceany2-prongwalloutletwithaproperlygrounded3-prongwallreceptacle.
Foryoursafety,nevercut,remove,ordisabletheelectrical(ground)connectionfrom
the plug. Never use an adapter plug or an extension cord with the soup well.
WARNING: Electric shock can result from an improperly grounded plug. Please
consult a qualied electrician if you have any questions about these grounding
instructions.
Before you begin:
PleasemakesurethatthispowercordisrmlyattachedtoyourCookTekunit
BEFORE plugging the unit into the power receptacle and before attempting operation.
Everyinstallationsitehasdifferentelectricalwiring.Becausemanydifferentlocal
codesexist,itistheOwnerandInstaller’sresponsibilitytocomplywiththosecodes.
CookTekisnotresponsibleforanyconsequentialdamagesasaresultoffailureto
complywithinstallationrequirements.
• Readallinstallationinstructionscarefullybeforestartinginstallation.
• Removesoupwellcarefullyfromcarton.
• Remove all loose packaging and accessories and save for subsequent shipment or
in case of concealed shipping damage.
• Itistheresponsibilityoftheinstallertocomplywithallfederal,stateandlocal
codes.
• Anyinstallationnotmatchingthespecicationsdiscussedinthismanual
automaticallyvoidstheproduct’swarranty.
• Insert unit into counter top cutout.
• Plug one end of the control cable into the unit and thread the cable through the
cutout for the control box.
• Plug the other end of the control cable into the control box and mount the control
box with four screws in the desired location.
PREPARING YOUR COOKTEK INDUCTION SOUP WELL UNIT FOR USE
ELECTRICAL INSTALLATION REQUIREMENTS
MECHANICAL INSTALLATION