CookTek ISW061 - Error Codes

Manual ISW06x 14161_A USINTL
10
Intheeventofapossiblemalfunction,yourCookTeksoupwellwilldisplayan
errorcodeonthealphanumericdisplay.Unitswillbeepaspecicnumberoftimes,
indicatedbytheerrorandashthelightsonthecontrolbox.Pleaseconsultthe
followingtablewhenencounteringanerrorcode.Toreseterrorconditions,remove
the pan from the unit and press the Power button, or unplug the unit.
Error Error Cause Displayed Message Troubleshooting
1 Broken temperature
sensor.
E-01 Servicerequired.
2 Broken temperature
sensor. Pan temperature
is too high.
E-02 Removeanypansfrom
thedrywellsurfaceand
letcool.Turnunitoff
and on to reset error.
If problem persists,
contact service provider.
3 Over current (peak). E-03 Trydifferentcookware.
Servicemaybe
required.
7 Hardware failure. E-07 Servicerequired.
8 Zerocrosserror. E-08 Turnunitoff,thenon.
Plug unit into outlet on
different circuit breaker.
If problem persists,
service is required on
device.
13 User interface error. E-13 Check control panel
connection,cyclepower.
Servicerequired.
16 Critical error. E-16 Call dealer for service.
Servicerequired.
ERROR CODES