Cookworks KDF-596D - Troubleshooting; Air Fryer Not Working; Undercooked or Overcooked Results

12
water and with some washing liquid soap. Put the basket into frying tray let the frying tray soak
for approximately 10 minutes.
1. Clean the inside of the appliance with hot water and a non-abrasive sponge.
2. Clean the heating element with a cleaning brush to remove any food residues.
Troubleshooting
Problem
Possible cause
Solution
The air fryer does not
work
The appliance is not
plugged into the mains.
Put the mains plug in an
earthed wall socket.
You have not set the
timer.
Follow the operational guide
"Using the Appliance" section in
this instruction manual
Results are
undercooked or
overcooked
Too much food has
been put into the
cooking tray
Put smaller batches of ingredients
in the tray.
Smaller batches are fried more
evenly.
The set temperature was
not correct
The preset temperature will
often need adjusting
depending on quantity and
size of the food type. Increase
or decrease temperature as
needed after choosing a food
type as explained in the "Using
the Appliance" section of this
instruction manual.
The set time was not
correct.
The preset time will often need
adjusting depending on quantity
and size of the food type.
Increase or decrease time as
needed after choosing a food
type as explained in the "Using
the Appliance" section of this
instruction manual.