10
HOW TO SET THE ‘OFF’TIMER.
This function enables you to set the length of time you want the cooler to operate.
You can set the time period from 30min. to 24 hours in 30min. and 1 hour increments.
1. When cooler is operating, press the ‘off timer’
button and set the length of time you want by
pressing ▲ or ▼.
Each time you press the button you will increase the
‘time to off’ period by 30mins. up to 10 hours, and
1 hour thereafter up to 24 hours.
The display will show .5 for 30min and 1 for an hour.
e.g. 1
1/2
hours will be shown as 1.5.
2 .When you have finished setting the time period, the
‘off timer’ lamp will illuminate, which indicates the cooler
is in sleep (off timer) mode.
3. If you press the ‘off timer’ button during its operation,
the remaining time will be shown.
4. To CANCEL timing, press ‘off timer’ button for ONE
second. It will then switch the timer off automatically.
OFF TIMER LAMP IS ON
AFTER 1hr
To Next Page
Loading...