To Next PageTo Next Page
Need help?Do you have a question about the Coonara INBUILT and is the answer not in the manual?
General| Type | Inbuilt Gas Heater |
|---|---|
| Fuel | Natural Gas or LPG |
| Fuel Type | Natural Gas or LPG |
| Thermostat | Yes |
| Ignition Type | Electronic |
Critical installation guidelines to avoid voiding warranty and general safety advice.
Overview of heater specifications, output, efficiency, and approvals.
Details installation compliance with standards, regulations, and authorized personnel.
Essential checks to perform before operating the heater for safe and effective use.
Instructions on how to turn the heater on, adjust settings, and manage fan operation.
Steps for safely shutting down the heater and allowing for fan cool down.
Crucial safety advice to prevent hazards during heater operation.
Description of automatic gas shut-off for flame failure and overheating.
Requirements for appliance commissioning according to AS/NZS 5601 standards.
Step-by-step guide for installing the freestanding model of the heater.
Detailed instructions for setting up the vertical flue system.
Steps for installing the flue through a 90-degree wall penetration.
Instructions for flue installation via a rear vent.
Step-by-step guide for installing the inbuilt model of the heater.
Vertical flue installation steps specific to the inbuilt model.
Instructions for horizontal flue installation for the inbuilt model.
Guidelines for installing the heater within a stud wall cavity.
Steps for installing the heater through a wall.
How to assemble and install the external weather cover.
Safety clearances to combustibles and flue installation notes.
Instructions on how to correctly install the decorative log set.
Details on adjusting and specifications of the Hermitage gas valve.
Electrical schematic showing component connections for the heater.
Guide to identify and resolve common problems with the heater.
Recommendations for cleaning, maintenance, and annual servicing of the heater.
Physical dimensions and clearances for freestanding and inbuilt models.
Steps for initiating and processing a warranty claim with the manufacturer.
Detailed warranty coverage, exclusions, and qualifications.
Contact details for Shamic Sheetmetal (Aust.) Pty. Ltd. for service and inquiries.
