2FT
1-5-6
DP 70 No original feed* During the primary feed of the second original in the single-
sided or double-sided original mode, even if retry operation is
performed five times, primary original feed is not performed.
71 An original jam in the orig-
inal conveying section 1*
During the secondary original feed in the single-sided or dou-
ble-sided original mode, the DP timing switch (DPTSW)* does
not turn off within 6500 ms of the original conveying motor
(OCM)* turning on.
72
An original size error jam*
During the secondary original feed in the single-sided or dou-
ble-sided original mode, the DP timing switch (DPTSW)* does
turn off within 750 ms of the original conveying motor (OCM)*
turning on.
73 An original jam in the orig-
inal conveying section 2*
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
switch (DPTSW)* does not turn off within 6500 ms of the origi-
nal conveying motor (OCM)* turning on.
74 An original jam in the orig-
inal conveying section 3*
During scanning of the second side or reversing of the original
for ejection in the double-sided original mode, the DP timing
switch (DPTSW)* does not turn on within 750 ms of the origi-
nal conveying motor (OCM)* turning on.
75 An original jam in the orig-
inal switchback section*
During the switchback operation of an original in the double-
sided original mode, the original switchback switch (OSBSW)*
does not turn on within 1300 ms of the original conveying
motor (OCM)* turning on.
Finisher 80 Jam between the finisher
and MFP*
The paper conveying switch (PCSW)* does not turn on within
1220 ms of the signal requesting paper ejection is output from
the MFP.
81
Intake jam*
During paper intake from the MFP, the paper conveying switch
(PCSW)* does not turn off within 1543 to 2740 ms (depending
on paper size) of paper conveying switch (PCSW)* turning on.
83 Jam during paper convey-
ing for batch ejection 1*
When ejection a stack of paper, the paper conveying switch
(PCSW)* does not turn on within 1252 ms of the paper con-
veying motor (PCM)* turning on.
84 Jam during paper convey-
ing for batch ejection 2*
When ejection a stack of paper, the paper conveying switch
(PCSW)* does not turn off within 1780 to 2512 ms (varies
depending on the paper size) of the paper conveying motor
(PCM)* turning on.
*: Optional.
Section Jam code Description Conditions
To Next Page
Loading...
