2FT
1-3-16
1-3-6 Installing the drawer heater (option)
Drawer heater installation requires the following parts:
Drawer heater (P/N 120 V specifications: 2C960030, 220-240 V specifications: 2C960040)
One (1) M4 x 10 tap-tight S binding screw (P/N B3024100)
<Procedure>
1. Remove the main body from the paper
feeder (see page 1-6-7).
2. Remove the right cover. Pull out the drawer.
3. Remove the three screws and then the front
right cover.
Figure 1-3-27
Front right cover
To Next Page
Loading...
