2FT
1-6-1
1-6 Assemb ly and Disassembly
1-6-1 Precautions for assembly and disassembly
(1) Precautions
Be sure to turn the power switch off and disconnect the power plug before starting disassembly.
When handling PCBs, do not touch connectors with bare hands or damage the board.
Do not touch any PCB containing ICs with bare hands or any object prone to static charge.
Use only the specified parts to replace the fixing unit thermostat. Never substitute electric wires, as the MFP may be seri-
ously damaged.
To Next Page
Loading...
