2FT-3.0
1-4-4
Mode setting
U264 Setting the display order of the date Inch specifications:
MONTH-DATE-YEAR
Metric specifications:
DATE-MONTH-YEAR
U265 Setting OEM purchaser code -
U277 Setting auto application change time 30
U326 Setting the black line cleaning indication ON
U332 Setting the size conversion factor 1.0/1.0/1.0
U341 Specific paper feed location setting for printing function -
U342 Setting the ejection restriction ON
U343 Switching between duplex/simplex copy mode OFF
U344 Setting preheat/energy saver mode Inch specifications:
ENERGY STAR
Metric specifications:
GEEA
U345 Setting the value for maintenance due indication -
Image
processing
U402 Adjusting margins of image printing 3.0/3.0/4.0
U403 Adjusting margins for scanning an original on the contact
glass
2.0/3.0/2.0/2.0
U404 Adjusting margins for scanning an original from the DP 2.0/3.0/2.0/2.0
U407 Adjusting the leading edge registration for memory image
printing
0.0
Network
scanner
U504 Initializing the scanner NIC -
U506 Setting the time out 10
Others U901 Checking/clearing copy counts by paper feed locations -
U903 Checking/clearing the paper jam counts -
U904 Checking/clearing the service call counts -
U905 Checking counts by optional devices -
U906 Resetting partial operation control -
U908 Changing the total counter value -
U910 Clearing the black ratio data -
U911 Checking/clearing copy counts by paper sizes -
U917 Setting backup data reading/writing -
U920 Checking the accounting counts -
U925 Checking/clearing the system error counts -
U926 Rewriting FAX program -
U927 Clearing the all accounting counts and machine life counts -
U928 Checking machine life counts -
U941 Setting the default magnification ratio of the default drawer 100 %
U942 Adjusting the DP amount of slack in the original 0/0
U984 Checking the developing unit number -
U985 Displaying the developing unit history -
U990 Checking/clearing the time for the exposure lamp to light -
U991 Checking the scanner count -
U993 Outputting a VTC-PG pattern -
Section Item
No.
Content of maintenance item Initial
setting*
*Initial setting for executing maintenance item U020
To Next Page
Loading...
