Coredy E300 - Connecting to Existing WiFi; Setup via Web Browser

08
To extend the range of your WiFi network, you must
connect the extender to your existing WiFi network.
You can do this in one of two ways:
Method 1. Connect with a web browser.
Method 2. Connect with WPS. For more
information, see Method 2: Connect with WPS.
For more 11.
WPS
WLAN
Power/WPS
WAN/LAN
LAN
ON
OFF
Repeater
Access Point
Router
Power/WPS
WLAN
WAN/LAN
LAN
Access Point
Router
Repeater
ON OFF
1
2
3
Connect to an Existing WiFi Network
2
1.
Use a WiFi network manager on a computer or mobile
device (recommended) to find and connect to the
extender WiFi network “Coredy E300” , type the
password (PIN number) on the label of rear panel
extender if required.
Method 1: Connect with a web browser