What to do if my Coredy R Pro R700 cannot be charged?
If your Coredy Vacuum Cleaner isn't charging, check if the indicator on the charging base lights up. Clean the charging contact pins with a dry cloth. Listen for a beep when docking the vacuum onto the charging base. If the indicator doesn't light up or you don't hear a beep, consider contacting the Coredy service center.
Why won't my Coredy R Pro R700 return to the charging base?
If your Coredy Vacuum Cleaner isn't returning to its charging base, remove any objects within 3 ft to the sides and 6 ft in front of the base. Note that the closer the vacuum is to the base (within 26ft), the quicker it returns; if it's farther, it will take more time. Clean the charging contact pins as well.
What to do if my Coredy R Pro Vacuum Cleaner R700 stops working suddenly?
If your Coredy Vacuum Cleaner stops suddenly, check if it's trapped or stuck. Also, check the battery level. If problems persist, turn the main power switch off, wait 2 seconds, and then turn it back on.
Why does the remote control not work for my Coredy R Pro Vacuum Cleaner?
If the remote control for your Coredy Vacuum Cleaner isn't working, replace the batteries. Ensure the vacuum is turned on and fully charged. The remote's workable range is limited to 5m/16.5ft.
Why is the suction power weak on my Coredy R Pro?
If the suction power of your Coredy Vacuum Cleaner is weak, check for obstructions blocking the suction inlet. Also, empty the dust collector and clean the filters with a vacuum cleaner or cleaning brush. Ensure the filters are dry, as wet filters can also reduce suction power.
What does it mean when my Coredy R Pro Vacuum Cleaner is flashing red and beeping four times?
If your Coredy Vacuum Cleaner is flashing red and beeping four times, it means the robot cannot return to its Charging Dock or starting position. Make sure that there are no obstacles in front of the Charging Dock or starting position. Wipe the Charging contacts on both the Charging Dock and robot with a clean, dry cloth.
What to do if my Coredy R Pro Vacuum Cleaner is flashing red and beeping twice?
If your Coredy Vacuum Cleaner is flashing red and beeping twice, it indicates that the robot is stuck. Free the robot and start it in a new location. Clean the side wheels of hair and debris, and ensure that they turn freely.
Why are my Coredy Vacuum Cleaner R700’s movements abnormal?
If your Coredy Vacuum Cleaner's movements are abnormal, clean the sensors carefully with a dry cloth. Then, restart the vacuum by turning the power switch off and on.
What to do if the rolling brush does not rotate on my Coredy Vacuum Cleaner?
If the rolling brush on your Coredy Vacuum Cleaner isn't rotating, clean the rolling brush and check if the rolling brush and brush guard have been installed properly.
What does it mean when my Coredy R Pro Vacuum Cleaner flashes red and beeps three times?
If your Coredy Vacuum Cleaner is flashing red and beeping three times, the cliff sensors may be dirty, it might be hanging over a drop, or it's stuck on a dark surface. If it's hanging over a drop or on a dark surface, start it in a new location. Otherwise, wipe its cliff sensors with a dry cloth.
General| Brand | Coredy |
|---|---|
| Model | R Pro Series |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
