To Next Page
Z
zstanleySep 3, 2025
Why the remote control does not work for Coredy Vacuum Cleaner?
- TThomas BrownSep 4, 2025
Replace the batteries in the remote control. Make sure Coredy R500+ is turned on and fully charged.
Why the remote control does not work for Coredy Vacuum Cleaner?
Replace the batteries in the remote control. Make sure Coredy R500+ is turned on and fully charged.
What to do if indicator liting red and two beeps on Coredy R500+?
Clean the side brush and press the power button to restart the Coredy Vacuum Cleaner.
What to do if indicator liting red and one beep on Coredy R500+?
Clean the front caster wheel and press the power button to restart the Coredy Vacuum Cleaner.
What to do if indicator liting red and four beeps on Coredy R500+?
Remove and clean the Coredy Vacuum Cleaner's extractors and caps.
Why you cannot schedule cleanings on Coredy Vacuum Cleaner?
Make sure the main power switch on the bottom of Coredy R500+ is turned on. Make sure the time, time of day (AM/PM), and the scheduled time have been set correctly. Check if Coredy R500+’s power is too low to start cleaning.
Why Coredy R500+ Vacuum Cleaner’s movements or travel path are abnormal?
Clean the sensors carefully with a dry cloth. Restart Coredy R500+ by turning the power switch off and on.
What to do if indicator flashing red and one beep on Coredy R500+ Vacuum Cleaner?
Restart cleaning Coredy Vacuum Cleaner in a new location.
How to fix the rolling brush that does not rotate on Coredy R500+?
Clean the rolling brush. Check if the rolling brush and brush guard have been installed properly.
Why Coredy R500+ Vacuum Cleaner stops working suddenly?
Check if Coredy R500+ is trapped or stuck on an obstacle. Check if the battery level is too low. If you still have trouble, turn off the main power switch, wait for 2 seconds, and then turn it back on.
What to do if my Coredy R500+ Vacuum Cleaner can't return to its Charging Dock?
Ensure there are no obstacles in front of the Charging Dock or starting position. Clean the Charging contacts on both the Charging Dock and robot with a clean, dry cloth. This should allow your Coredy Vacuum Cleaner to return to its charging dock.
Robot is for indoor use only, not outdoor, commercial or industrial environments.
Guidelines for using rechargeable battery packs, charging, and handling the charging dock.
Identifies key controls and indicators on the robot's top surface.
Details external parts like sensors, wheels, brushes, and dust bin.
Illustrates the Charging Dock, Adapter, Remote Control, brushes, and filters.
Explains the components and indicators of the Charging Dock.
Outlines the buttons and display screen of the remote control for operating the robot.
Pre-cleaning checks for objects, cords, and balcony safety.
Step-by-step instructions for setting up and activating the robot for initial use.
Details Auto Cleaning and Floor Mopping functions.
Covers Spot, Max Vacuuming, Edge, and Single Room cleaning modes.
Instructions for manual control and using boundary strips.
Instructions for setting up and managing automated cleaning schedules via the remote.
Procedure for removing and emptying the robot's dust bin.
Steps for removing and cleaning the robot's filter.
Instructions for removing, cleaning, and reinstalling the side brush.
How to clean cliff sensors, charging contacts on robot and base.
Method for cleaning the floor tracking sensor with a cloth.
Steps for removing and cleaning the main extractors (brushes).
Details on lithium ion battery, charging, storage, disposal, and replacement.
Guides to resolve issues based on indicator lights and beep sounds.
Addresses issues like returning to base, brush rotation, and movement anomalies.
Answers to common user queries regarding activation, control, and charging.
General| Brand | Coredy |
|---|---|
| Model | R500+ |
| Category | Vacuum Cleaner |
| Language | English |
