What to do if indicator liting red and three beeps on Coredy R500+ Vacuum Cleaner?
Remove and empty the Coredy Vacuum Cleaner's bin. Clean the filter. Then, briskly tap the bin to loosen any remaining trapped debris.
Why Coredy R500+ Vacuum Cleaner cannot be activated?
Make sure the main power switch is in the ON position. Make sure the battery is fully charged. Replace the batteries (2 AAA) in the remote control. Make sure the remote control is within range (16 ft/5 m) of Coredy R500+. If you still have trouble, turn off the main power switch and then turn it back on.
What to do if indicator flashing red and two beeps on Coredy R500+ Vacuum Cleaner?
If the Coredy Vacuum Cleaner is stuck, free it and start in a new location. Clean the robot’s side wheels of hair and debris. Push the wheels in and out, and check that they both turn freely.
Why Coredy R500+ Vacuum Cleaner cannot be charged?
Check if the indicator on the Charging Base lights up. If not, contact the Coredy service center to repair or replace the Charging Base. Dust off the charging contact pins with a dry cloth. Check if you can hear a beep when Coredy R500+ is docked onto the Charging Base. If not, contact the Coredy service center to repair or replace the Charging Base.
What to do if indicator flashing red and three beeps on Coredy R500+ Vacuum Cleaner?
If the Coredy Vacuum Cleaner is hanging over a drop or on a dark surface, start it in a new location. Otherwise, wipe its cliff sensors with a dry cloth.
Why Coredy R500+ Vacuum Cleaner cannot return to the Charging Base?
Remove objects within 3 ft/1 m to the left and right side and within 6 ft/2 m of the front of the Charging Base. When Coredy R500+ is in the vicinity of the Charging Base, it will return more quickly. However, if the Charging Base is located far away, Coredy R500+ will need more time to return. Please be patient as it works its way back. Clean the charging contact pins.
Why is the suction power weak on my Coredy R500+ Vacuum Cleaner?
Check if any obstructions are blocking the suction inlet. Empty the dust collector. Clean the filters with a vacuum cleaner or a cleaning brush. Check if the filters are wet due to water or other liquid on the floor. Air-dry the filters completely before use.
Robot is for indoor use only, not outdoor, commercial or industrial environments.
Guidelines for using rechargeable battery packs, charging, and handling the charging dock.
Identifies key controls and indicators on the robot's top surface.
Details external parts like sensors, wheels, brushes, and dust bin.
Illustrates the Charging Dock, Adapter, Remote Control, brushes, and filters.
Explains the components and indicators of the Charging Dock.
Outlines the buttons and display screen of the remote control for operating the robot.
Pre-cleaning checks for objects, cords, and balcony safety.
Step-by-step instructions for setting up and activating the robot for initial use.
Details Auto Cleaning and Floor Mopping functions.
Covers Spot, Max Vacuuming, Edge, and Single Room cleaning modes.
Instructions for manual control and using boundary strips.
Instructions for setting up and managing automated cleaning schedules via the remote.
Procedure for removing and emptying the robot's dust bin.
Steps for removing and cleaning the robot's filter.
Instructions for removing, cleaning, and reinstalling the side brush.
How to clean cliff sensors, charging contacts on robot and base.
Method for cleaning the floor tracking sensor with a cloth.
Steps for removing and cleaning the main extractors (brushes).
Details on lithium ion battery, charging, storage, disposal, and replacement.
Guides to resolve issues based on indicator lights and beep sounds.
Addresses issues like returning to base, brush rotation, and movement anomalies.
Answers to common user queries regarding activation, control, and charging.
General| Brand | Coredy |
|---|---|
| Model | R500+ |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
