To Next Page
D
dustinmartinAug 20, 2025
Why is my Coredy R380 Vacuum Cleaner not connecting to Wi-Fi?
- JJames HansonAug 20, 2025
Make sure your Wi-Fi router supports the 2.4GHz and 802.11b/g/n bands; the 5GHz band is not supported.
Why is my Coredy R380 Vacuum Cleaner not connecting to Wi-Fi?
Make sure your Wi-Fi router supports the 2.4GHz and 802.11b/g/n bands; the 5GHz band is not supported.
How to fix the remote control if it does not work with my Coredy R380 Vacuum Cleaner?
Replace the batteries in the remote control. Make sure Coredy R380 is turned on and fully charged. The workable range distance is 16ft/5m.
Why I cannot control my Coredy R380 Vacuum Cleaner with Amazon Alexa?
Check for any Internet connection problems. Check whether you have installed the Amazon Alexa App onto your smart device and enabled “Smart Life” Skill in the Amazon Alexa App. Make sure you have a Coredy Robot account connected to Coredy R380 Robot and that you are using correct Alexa voice-commands.
Why I cannot control my Coredy R380 Vacuum Cleaner with the Google Assistant?
Check for any Internet connection problems. Check if you have installed the Google Home App onto your smart device and initiated the “Coredy Robot” action in the Google Home App. Also, ensure you are using the proper commands when talking to the Google Assistant, starting with the wake words “Ok Google,” and speak clearly.
Why does my Coredy R380 Vacuum Cleaner not return to the Charging Base?
Ensure that there are no objects within 3ft/1m to the left and right side and within 6ft/2m of the front of the Charging Base. Note that when Coredy R380 is in the vicinity of the Charging Base (within 26ft/8m), it returns more quickly. If the Charging Base is located far away (over 26ft/8m), Coredy R380 needs more time to return, so be patient. Also, clean the charging contact pins.
What to do if my Coredy R380 Vacuum Cleaner suction power is weak?
First, check for any obstructions blocking the suction inlet. Then, empty the dust collector. Clean the filters using a vacuum cleaner or a cleaning brush. Also, check if the filters are wet; if they are, air-dry them completely before use.
How to fix Coredy R380 Vacuum Cleaner if it stops working suddenly?
Check if Coredy R380 is trapped or stuck on an obstacle, and check the battery level. If the problem persists, turn off the main power switch, wait for 2 seconds, and then turn it back on.
What to do if my Coredy R380 Vacuum Cleaner cannot be activated?
Ensure the main power switch is in the ON position and that the battery is fully charged. Replace the batteries (2 AAA) in the remote control and make sure the remote control is within 16ft/5m of Coredy R380. If the issue continues, turn off the main power switch and then turn it back on.
Why does my Coredy R380 Vacuum Cleaner blink and sound with Four beeps (Indicator Flashing Red)?
The robot's battery power level is too low, and it cannot return to its charging dock. Manually place the robot on the charging dock to charge. Also, ensure there are no obstacles in front of the charging dock or starting position, and wipe the charging contacts on both the charging dock and robot with a clean, dry cloth.
Why does my Coredy R380 Vacuum Cleaner blink and sound with Three beeps?
This happens when the robot's vacuum fan is stuck or its filter is clogged. Remove and empty the robot's dust bin. Clean the robot's filter, then briskly tap the bin to loosen any remaining trapped debris. Make sure the vacuum inlet is not blocked by any hair or debris.
Essential safety advice, use restrictions, and handling precautions for robot operation.
Visual guide to identifying all key components on the robot's top and bottom surfaces.
Provides essential safety tips and step-by-step instructions for robot setup and charging.
Detailed steps for initial robot setup, including brush installation and charging dock placement.
Guide to creating a user account and managing app permissions for enhanced robot control.
Steps to add your Coredy robot device to the Coredy Robot App.
Instructions for resetting the Wi-Fi connection and understanding Wi-Fi status light indicators.
How to start, stop, pause, and select different cleaning modes for the robot.
Details on using Random and Spot cleaning modes for targeted or intensive cleaning.
Guide to Edge cleaning mode and adjusting suction power and mopping levels via the app.
Using the carpet boost feature and scheduling cleaning tasks through the app.
Steps to set the remote control clock and configure cleaning schedules.
How to cancel cleaning schedules and manually direct the robot's movement.
Step-by-step guide for emptying the robot's dust bin and water tank.
Instructions for washing and drying the mopping module and its cloth.
How to clean the robot's side brushes, rolling brush, sensors, bumper, and charging contacts.
General| Brand | Coredy |
|---|---|
| Model | R380 |
| Category | Vacuum Cleaner |
| Type | Robot Vacuum |
| Battery Capacity | 2600 mAh |
| Run Time | 120 minutes |
| Filter Type | HEPA |
| Auto Recharge | Yes |
| Virtual Wall | No |
| Scheduling | Yes |
| Wet Mopping | No |
| Charging Time | 300 minutes |
| Dustbin Capacity | 0.6 L |
| Weight | 2.7 kg |
| Noise Level | 65 dB |
| Compatible Floor Types | Carpet |
