Coredy R500+ - 6 Specifications

26
Coredy R500+ cannot
return to the Charging
Base.
Remove objects within 3 ft/1 m to the left and right side and within 6 ft/2 m of the front of the Charging Base.
When Coredy R500+ is in the vicinity of the Charging Base, it will return more quickly. However, if the
Charging Base is located far away, Coredy R500+ will need more time to return. Please be patient as it works
its way back.
Clean the charging contact pins.
The rolling brush does
not rotate.
Clean the rolling brush.
Check if the rolling brush and brush guard have been installed properly.
Coredy R500+’s
movements or travel
path are abnormal.
Clean the sensors carefully with a dry cloth.
Restart Coredy R500+ by turning the power switch off and on.
Problems Solutions
6 Specifications
Product Model R500+
Input
19 V
0.6 A
Battery Voltage DC 14.4 V
Power Consumption 28 W
Battery Type
DC 14.4 V
Li-ion 2600 mAh
Dust Collector Capacity 0.55 L
Cleaning Time Max. 120 mins
Charging Time 300 - 360 mins
Input
19 V
0.6 A
Output
19 V
0.6 A