EasyManua.ls Logo

cormidi C85 Series - Initial Machine Setup; First Use Procedures; Breaking-In Period Recommendations

cormidi C85 Series
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction for use
28
3 INSTRUCTION FOR USE
3.1 FIRST USE
READ CAREFULLY: Before using the machine you must read all of the
instruc- tions in this manual and the user’s and maintenance manual of the
motor in- stalled on your machine scrupulously. Furthermore, always keep
it attached to the machine.
fig. 16 Container for manuals
The owner's manual and maintenance, together with the manual of the engine of the machine,
must be always easily available and should be kept in the dedicated container fixed on the
machine
(see the fig. 16) The machine is normally delivered completely assembled and ready for use
with an empty fuel tank.
Fill the fuel tank, open the fuel tap and follow the start-up procedure described in
the ap- propriate paragraph.
3.2 BREAKING-IN PERIOD
The technology used during the construction of your machine does not require a
break in period. However, during the first period of use, it is necessary to use
these precautions:
During the first 50 hours, avoid using the motor at over 70 % of the total power.
READ CAREFULLY: Read the user’s manual and the maintenance manual
for the motor installed in your machine carefully and follow the instructions
pre- scribed for its own break in period.
After the first 20 hours of operation, check the level of the hydraulic oil in the tanks.
During the first period of use, the tracks undergo an adjustment, for which it
is neces- sary, after the first 50 hours of operation, to carry out the regulation
of the tension of the tracks.

Related product manuals