1.3 MACHINE AND MANUFACTURER IDENTIFICATION
The data which identifies the machine and the manufacturer are listed on the
alluminium plate that is affixed on the dashboard of the machine. The frame number
is Impressed on the left rear fender (see fig. 1).
fig. 1 - Identification Plate (cod. C1094.14.10)
1.4 SAFETY DEVICES
WARNING: Before beginning work, verify the working order of the safety
devices and substitute any worn-out and/or broken parts immediately.
PROHIBITED: it is strictly prohibited to use the machine with its safety devices and
protection removed, blocked, or in any way made non functional.
To Next Page
Loading...
