Flavor Fusion 255 Drip Tray to ‘Z’ Style Unit Conversion Installation Instructions
© 2006, IMI Cornelius Inc. - 1 - Publication Number: 629088779INS
INSTALLATION INSTRUCTIONS
FLAVOR FUSION 255 WITH DRIP TRAY TO ‘Z’ STYLE UNIT CONVERSION
THIS EQUIPMENT MUST BE INSTALLED WITH ADEQUATE BACKFLOW PROTECTION
TO COMPLY WITH APPLICABLE FEDERAL, STATE AND LOCAL CODES.
IMPORTANT!!!
BE SURE TO INSULATE ALL FITTINGS/HOSE WITH INSULATION TUBE
AND TAPE SUPPLIED IN KIT. FAILURE TO DO SO WILL LEAD TO CONDENSATION PROBLEMS
DRAIN TUBE
P/N 53169
3/4" BARBED ELBOW
2 PLACES
P/N 51280
1" BARB SPLICER
P/N 53293
(PLUMB TO EXISTING DRAIN LINE)
'Z' STYLE SPLASH PANEL
P/N 620053350 (SILVER)
P/N 620053351 (BLACK)
EXISTING COLDPLATE
DRAIN BOOTS
2 PLACES
#8-32 MOUNTING SCREWS
2 PLACES
P/N 70178
SEE DETAIL A
DETAIL A
SCALE 0.375
ADJUSTABLE FORMING BRACKET
(HELPS TO KEEP SPLASH PANEL
SIDES FLUSH WITH SIDE PANELS,
MOUNT BRACKETS INSIDE OF
SPLASH PANEL)
P/N 620053264
2 PLACES
#8-18 X 1/2" LONG SCREW
P/N 620705801
2 PLACES
HOSE CLAMP
4 PLACES
P/N 71086
HOSE CLAMP
1 PLACES
P/N 70750
Release Date: July 7, 2006 www.cornelius.com Revision: B
Need help?
General
