Need help?Do you have a question about the Cornelius IAC530 and is the answer not in the manual?
General| Model | IAC530 |
|---|---|
| Type | Ice Maker |
| Ice Type | Cube |
| Cooling Type | Air-Cooled |
| Refrigerant | R404A |
| Ice Production | 530 lbs per day |
| Water Connection | 3/8" FPT |
| Voltage | 115V |
Defines the responsibilities of the original owner and end-user for the ice maker.
Explains how to interpret the model and serial numbers found on the unit's plate.
Details serial number formatting changes effective from January 1, 1995.
Discusses factors affecting ice maker capacity and general ratings.
Provides a method to check ice production rates and compare to tables.
Presents data tables for ice production under various conditions.
Details the function of the main circuit board in controlling the ice maker's operations.
Explains how to reset the ice maker after an error condition.
Describes the function and settings of the voltage selector switch.
Explains the use and limitations of the stacking cable for multiple units.
Identifies the test plug and warns against voltage checks.
Explains the safety timer that terminates harvest mode after 4 minutes.
Provides a procedure to diagnose the circuit board using LED indicators.
Guides on diagnosing thermistor sensors and their output voltage.
Provides notes on evaporator switch operation and connections.
Details how to perform voltage checks on evaporator switches.
Explains the function and adjustment of the water regulating valve.
Explains the high pressure safety cut-out switch function and reset.
Describes the float valve's role in maintaining water level and flow washer.
Details the proper procedure for closing service stem valves.
Provides suggestions for diagnosing automatic Thermostatic Expansion Valves.
Lists symptoms associated with a starving TXV in the ice maker.
Lists symptoms associated with a flooding TXV in the ice maker.
Outlines procedures for checking compressor start components.
Explains the operation of potential and current type relays.
Describes methods for testing capacitors for defects.
Addresses issues when the cuber is not operating and has no power.
Troubleshoots scenarios where indicator lights are off and power is missing.
Addresses issues when the compressor runs but doesn't cool.
Troubleshoots why the cuber stays in the freeze cycle.
Troubleshoots why the cuber stays in the harvest cycle.
Instructions for preparing the ice maker for cleaning.
Details how to clean the water system and evaporator.
Steps for sanitizing the ice machine after cleaning.
To Next Page