ASSEMBLING YOUR HEATER
1.
Unpacking
1) Open top
of
the carton, remove batteries and the top pad.
2)
Take the heater and the siphon pump out of the carton.
3)
Remove all external packing materials.
4) Remove
the
band from
the
grille guard and open
it
as described below.
Note:
The
grille guard
is
designed
to
open
to
a halfway position. Do not force
it
open beyond
that
position.
a. Remove
the
catch
on
the
upper right side
of
the
unit
by pushing
it
in
the
direction of
the
arrow
(1).
b.
Take
off
the
grille guard by
lifting
it
up in
the
direction of
the
arrow
(2)
. (Reverse
the
process
to
install
the
grille guard.)
5)
Take
packing material off
the
burner chimney.
6)
Open
the
fuel
tank
access
door and remove packing material.
Note: Keep
the
carton and all packing materials for use
to
store
the
heater during
the
off-season.
2.
Placing burner chimney
in
right position
Put
the
burner chimney
back
to
its
original position. Move
the
chimney handle from side
to
side
to
make sure
that
the
burner
chimney is seated
correctly on
the
wick
guide.
- 4 -
Packing materials
Move from side to
side
To Next Page
Loading...
