EasyManuals Logo

Corsair HYDRO X Series Manual

Corsair HYDRO X Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
OPTIONAL: If the original backplate does not stick to the
motherboard (i.e. has no adhesive side), please use the
included dual-sided tape to secure the original backplate
to the motherboard as shown in Figure 1.
EN OPTION : Si la plaque arrière de série ne peut pas être
cole à la carte-re (c’est-à-dire il n’y a pas d’adhésif),
utilisez le ruban adsif double face pour xer la plaque
arrière de série à la carte mère, comme indiqué sur la
Figure 1.
OPTIONAL: Wenn die Original-ckplatte nicht auf dem
Motherboard klebt (d. h. keine Klebeseite hat), verwenden
Sie bitte das mitgelieferte beidseitige Klebeband, um die
Original-Rückplatte an dem Motherboard zu befestigen, wie
in Abbildung 1 dargestellt.
OPZIONALE: Se non è possibile ssare la piastra di supporto
alla scheda madre (per es. se il lato non è adesivo), per il
ssaggio della piastra di supporto originale alla scheda madre
si prega di utilizzare il nastro biadesivo in dotazione, come
mostrato nella Figura 1.
OPCIONAL: Si la placa posterior original no se adhiere a
la placa base (es decir, no tiene lado adhesivo), utilice la
cinta adhesiva de doble cara incluida para asegurar la placa
posterior original a la placa base como se muestra en la
Figura 1.
ПО ВЫБОРУ: Если оригинальный бэкплейт не прикрепляется
к материнской плате (т.е. не имеет клеящейся стороны),
пожалуйста прикрепите оригинальный бэкплейт к материнской
плате с использованием двухсторонней клейкой ленты,
включенной в комплект поставки, как показано на рис. 1.
1
E
Place the XC7 RGB with the pre-installed original AM4
backplate onto the motherboard.
Placez le bloc XC7 RGB avec la plaque arrre AM4 d’origine
préinstale sur la carte mère.
Platzieren Sie den XC7 RGB mit der vormontierten
Original-AM4-ckenplatte auf dem Motherboard.
Posizionare l’unità XC7 RGB con la piastra di supporto AM4
originale preinstallata sulla scheda madre.
Coloque el XC7 RGB con la placa posterior AM4 original
preinstalada en la placa base.
Установите XC7 RGB с предварительно установленным
оригинальным бэкплейтом AM4 на материнскую плату.
11 12
AMD
AMD

Other manuals for Corsair HYDRO X Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Corsair HYDRO X Series and is the answer not in the manual?

Corsair HYDRO X Series Specifications

General IconGeneral
BrandCorsair
ModelHYDRO X Series
CategoryComputer Hardware
LanguageEnglish

Related product manuals