EasyManuals Logo

Corsair SF750 User Manual

Corsair SF750
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
component additions.
6. Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked
with “I”).
Zero RPM mode
Zero RPM mode allows the fan to remain off during low to medium loads. This technology uses various temperatures
from inside the PSU and the power output level to determine when active cooling is needed for the PSU. When
you’re pushing it hard the fan will turn itself on to ensure that it gets the cooling it needs without any extra noise. For
the specific fan profile of your unit please refer to the specifications section of that PSU.
Important safety information
CAUTION ELECTRIC SHOCK HAZARD!
1. Install in accordance with all manufacturer instructions and safety warnings. Failure to do so may result in
damage to your power supply or system, and may cause serious injury or death.
2. High voltages are present in the power supply. Do not open the power supply case or attempt to repair the
power supply; there are no user-serviceable components.
3. This product is designed for indoor use only.
4. Do not use the power supply near water, or in high temperature or high humidity environments.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce
heat.
6. Do not insert any objects into the open ventilation or fan grill area of the power supply.
7. Do not modify the cables and/or connectors included with this power supply.
8. If this power supply uses modular cables, use only manufacturer supplied cables. Other cables might not be
compatible and could cause serious damage to your system and power supply.
9. The 24-pin main power connector has a detachable 4-pin connector. This 4-pin connector is not a P4 or ATX
12V connector. Do not force this cable in the P4 or ATX +12V socket on the motherboard.
10. Failure to comply with any manufacturer instructions and/or any of these safety instructions will immediately
void all warranties and guarantees.
WEB: corsir.com
Phone: (888)222-4346
Support: support.corsir.com
BLOG: corsair.com/blog
FORUM: forum.corsair.com
YOUTUBE: youtube.com/corsairhowto
© 2010-2018 CORSAIR MEMORY, Inc. All rights reserved.
CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other
trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-001769 AA

Other manuals for Corsair SF750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Corsair SF750 and is the answer not in the manual?

Corsair SF750 Specifications

General IconGeneral
Total power750 W
AC input voltage- V
Combined power (-12V)3.6 W
Combined power (+3.3V)130 W
Combined power (+5Vsb)12.5 W
Max output current (+12V)62.5 A
Max output current (-12V)0.3 A
Max output current (+3.3V)20 A
Max output current (+5Vsb)2.5 A
Cooling typeActive
Fan diameter92 mm
Product colorBlack
Cabling typeFully-Modular
CPU power cable length400 mm
SATA power cable length450 mm
EPS power connector (8-pin)Yes
Motherboard power connector24-pin ATX
Floppy drive power connector0
PCI Express power cable length500 mm
Number of SATA power connectors8
PCI Express power connectors (8-pin)4
Peripheral (Molex) power cable length330 mm
Peripheral (Molex) power connectors (4-pin)3
PurposePC/server
ATX version2.4
Bearing technologyRifle
80 PLUS certification80 PLUS Platinum
Mean time between failures (MTBF)100000 h
Continuous output rated temperature50 °C
Power supply unit (PSU) form factorSFX
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth63 mm
Width125 mm
Height100 mm

Related product manuals