Dimension & Clearance
Dimension & Clearance
24” Gas Range
Clearance
Clearance between the top of the cooking surface and the bottom wood
or metal cabinet that is protected by not less than:
1/4-inch-thick flame-retardant mill-
board covered with not less than:
o
No. 28 MSG sheet steel or
o
0.015-inch-thick stainless steel or
o
0.024-inch-thick aluminum or
Top Hood and Cabinet Specifications
Condition Minimum
clearance allowed
Clearance between the top of the cooking surface and the bottom of an
unprotected wood or metal cabinet
30”
Clearance between the top of the cooking surface and the bottom wood
or metal cabinet that is protected by not less than:
1/4-inch-thick flame-retardant mill-
board covered with not less than:
o
No. 28 MSG sheet steel or
o
0.015-inch-thick stainless steel or
o
0.024-inch-thick aluminum or
o
0
.
020-inch-thick copper
24”
22 23
EPGR244
To Next Page
Loading...
Need help?
General
