Cosmo COS-GRP304 Installation Instructions

32
Installing the Control Knob
1. Hold the knob in an upright position with the OFF marking facing
upward. Observe the open part centered on the back of the knob.
2. Place and align the open part on the back of the knob over the control
stem that is sticking out of the control panel.
3. Press the knob onto the stem, and make sure the knob is in the OFF
position.
Removing the Control Knob
1. Pull the knob straight off the stem.

Cosmo COS-GRP304 Specifications

General

Brand	Cosmo
Model	COS-GRP304
Category	Ranges
Language	English