7
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and
follow the instructions provided with any tools listed here.
Tools Needed
• Tape measure
• Phillips screwdriver
• Level
• Drill and drill bit (for anti-tip
bracket installation)
• Adjustable wrench or pliers
• Pipe wrench
• Pipe-joint compound resistant to
Propane gas
• Noncorrosive leak-detection
solution
• Marker or pencil
For Propane/Natural Gas
Conversions
• Combination wrench
• Nut drive
Parts Needed
New flexible gas supply line
(3/4" or 1/2" NPT x 1/2" ID)
New Flare Union Adapter
(3/4" or 1/2" NPT x 1/2" ID)
New Flare Union Adapter
(1/2" NPT x 1/2" ID)
Gas line shut-off valve
To Next Page
Loading...
Need help?
General
