16
INSTALLATION INSTRUCTIONS
Prepare Location
• It is recommended that the duct system be installed before the range hood
is installed.
• Before making cutouts, make sure there is proper clearance within the
ceiling or wall for duct fittings.
1. Disconnect power.
2. Determine which venting method to use: roof, wall, or ductless.
3. Select a flat surface for assembling the range hood. Place covering over
that surface.
WARNING
4. Using 2 or more people, lift range hood onto covered surface.
Excessive Weight Hazard
Use two or more people to move and install range hood.
Failure to do so can result in back or other injury.
To Next Page
Loading...
