26
Replacing the LED Light
Turn off the range hood and allow the LED Lights to cool. Replace the LED
lights using tissue or wearing cotton gloves to handle them.
1. Disconnect power.
2. Remove the metal filters. See "Metal Grease Filter" in the "RANGE HOOD
CARE" section.
3. Disconnect the LED light cable from the range hood.
7. Reinstall the metal filters into the range hood.
8. Reconnect power.
4. Use a flat-blade screwdriver to gently pry and remove th
e LED light.
5. Install a replacement LED light. Be sure to properly align the LED light with
the opening and the LED light is securely locked into place.
6. Connect the LED light cable to the range hood.
To Next Page
Loading...
Need help?
General
