7
Fully Recessed Installation - 1 Side
Fully Recessed Flush Installation
1. Follow steps 1 & 2 from the 3 sided
installation instructions.
2. Remove the corresponding drywall
stops according to your installation (in
the example, the drywall stops on the
left end would be removed.)
3. Install the side glass then the
corresponding side cover according to
your installation (the side glass must be
installed before the metal side cover.)
4. Install the re unit in the framed
opening with a minimum 1 ¼ drywall
screws to secure the unit.
5. Mask the exposed re unit during the
drywall process. Install drywall to the
drywall stops on the perimeter of the
re box. For more information on the
drywall stops see the Product Guide on
page 4. Decorate as desired.
6. Install the remaining side glass and
front glass.
1. Follow steps 1 & 2 from the 3 sided
installation instructions.
2. Remove the drywall stops on both sides
of the re unit.
3. Install the side glass then side covers
on both sides of the re unit (the side
glass must be installed before the metal
side cover.)
4. Install the re unit in the framed
opening with a minimum 1 ¼ drywall
screws to secure the unit.
5. Mask the exposed re unit during the
drywall process. Install drywall to the
drywall stops on the perimeter of the
re box. For more information on the
drywall stops see the Product Guide on
page 4. Decorate as desired.
6. Install the front glass.
To Next Page
Loading...
