To Next PageTo Next PageHow to troubleshoot a Cotech GG3300B Inverter engine that will not start?
If your Cotech Inverter engine won't start, consider the following checks: * Ensure the engine switch is set to ON. * Check the fuel level and ensure the fuel cut-off valve is open. * Confirm the choke is set to CHOKE. * Check the oil level; a low oil level can trigger the safety cut-off switch. * Inspect the air filter for clogs.
What to do if my Cotech GG3300B Inverter engine runs but doesn't produce electricity?
If your Cotech Inverter's engine runs but doesn't produce electricity, here are a few things to check: * Ensure the AC on/off switch is set to ON. * Make sure the overvoltage cut-off hasn't tripped. * Verify that your devices aren't faulty, are correctly connected to the inverter, and that all cables are in good condition.
Instructions for bolting the handle onto the generator frame.
Instructions for bolting rubber feet and the support leg to the front crossbeam.
Instructions for attaching the wheels to the back of the generator frame using axle bolts.
Instructions on earthing the generator using an earth spike and connecting an RCD for protection.
Step-by-step guide to checking the engine oil level using the dipstick, including safety cut-off notes.
Safety precautions and steps for refuelling the generator outdoors with clean, fresh petrol.
Procedure for starting the generator, including choke usage, starter handle, and warm-up period.
Guidelines for connecting devices to 230 V outlets, wattage limits, and AC on/off switch function.
Information on using the 12 V outlet for charging batteries, current, safety cut-off, and recommendations.
Steps to safely turn off the generator, including disconnecting loads and fuel valve.
Schedule of maintenance tasks like oil checks, air filter cleaning, and spark plug checks by frequency.
Step-by-step guide for cleaning and maintaining the air filter, including washing and drying procedures.
Detailed instructions for changing the engine oil, including filler caps, drain plugs, and oil type.
Procedure for maintaining the spark plug, including removal, cleaning, gap check, and reinstallation.
Guidance on checking and cleaning the fuel filter located in the filler hole for proper fuel system function.
General