12
English
No. Explanation Reference picture
4
Select the hot button to drink hot water.
- To drink hot water, the hot water function must be
operating. Press the hot button for three seconds, and
the hot water mode lamp comes on; you can then use hot
water. If you don’t need the hot water, press the hot button
again for three seconds, and the lamp goes out, exiting hot
water mode. (The mode automatically returns to cold water
mode three seconds after the hot water mode is selected).
5
To drink hot water, select the hot button after the hot water
lamp goes on.
- Select the hot button and touch the extraction part, and you
can extract a cupful of water. If you touch the extraction
part again during extraction, the water stops flowing.
6
Empty the gutter periodically.
- Prevent water overflowing from the water receptacle by
periodically emptying it.
Checking the System after Installation
The water in the hot water tank is extremely hot. Exercise caution not to get burned.
WARNING
To Next Page
Loading...
Need help?
General
