No. Explanation Reference picture
1 1) Close main water supply valve to separate the
faucet.
2 1) Wind the teflon tape on the adaptor and fit it to
the pipe.
Do not turn the water pipe.
3 1) Connect the faucet with the adaptor.
Shall install the adaptor with connector on the
cold water pipe.
4 1) Connect ¼ inch orange tubing with the
connector on the adaptor.
Flush water through each filter at least
5 minutes before Connection.
5 1) Connect it to voltage rating that matches it on
the rating plate. Then, open the feed valve to
supply water to the filtration system.
To Next Page
Loading...
Need help?
General
