No. Explanation Reference picture
1 1) When using Cold/Hot water turn on the
Cold/Hot water function.
- To drink Cold/Hot water the Cold/Hot water
function should operate. Please check if the
Cooling/Heating mode indicator lamp is on.
2 1) Select cold water mode selection button to
drink cold water and check the operation
condition of the cooling mode indicator.
- When the cold water temperature indicator
on the indication part is on, turn the cold/
room water changeover faucet to the left
and push the cup-touch lever and you may
drink cold water.
3 1) To drink hot water select hot water mode
selection button and check the operation
condition of heating mode indicator.
- When the hot water temperature lamp on
the indication part is on, push the hot water
cup-touch lever and push down safety
button and you may drink hot water.
4 1) To drink room water.
- Turn the cold/room water changeover
faucet to the right and press the cup-touch
lever of the cock to extract room water.
Connect it to voltage rating that matches it on the rating plate.
Then, open the feed valve to supply water to the filtration system.
3-3 Using the product after installation
To Next Page
Loading...
Need help?
General
