No. Explanation Reference picture
3 1) Separate the fitting connected to the filter to replace
and then replace the filter.
- Separate the fitting using an appropriate tool.
After replacing the filter, check for leaks and drain
the the water purified for the first time using the new
filter.
4 1) Align the front cover with the groove at the bottom
and then close the cover by pressing it down.
- When replacing the Neo Sense filter:
Clean the Neo Sense filter for about 30 seconds
before installing it.
- When replacing the Fine Post Carbon Filter:
Clean the Fine Post Carbon Filter for about 30
seconds with the water coming from the Neo
Sense filter before installing the filter.
To Next Page
Loading...
