No. Explanation Reference picture
7 1) After installing the ceramic filter on the lower part of
the storage tank cover, close the sealing clips
(6 areas) of the storage tank.
2) Close the water tank cover after inserting the hose.
8 1) Close the top cover and then connect the power cord
before opening the main water supply valve.
After checking water extraction from the faucet of the
cold/room water and hot water, press the cold/hot
water selection switch in front of the product for
2 seconds for re-operation.
Please close the cover of the storage tank
completely.
- Ants or other substances might get inside.
To Next Page
Loading...
