Coway P-07FR - INSTALLATION GUIDELINES; Installation Safety Precautions; Installation Site Selection; Plumbing and Connection

16
How to Use
HOW TO USE
|
Room water
|
Extract continuously
|
Restart / INSTALLATION
INSTALLATION
Be cautious!
 Water ltration device installation place 1
Pleaseinstallthewaterltrationsystemnotataroughplace,adamp
place,aplacewheretheunitisexposedtothedirectsunlight,a
placewheredustispresent,oraplacethatthewaterdrops.
 Water ltration device installation place 2
Pleaseinstallattheplacewhereitis10cmormoreofromthewall
andthebottomisatandrm.
 Cold water plumbing
Pleaseconnecttothecoldwaterpipenecessarily.(Ifyouconnectto
thewarmwaterpipe,theltercanbedamaged.)
 Movement and installation
Whenthepositionismoved,connectthepowercordwhen30
minutespassesafterinstalling.
$IWHU
PLQXWHV
+RW
:DWHU
Tomaintainoptimalproductperformance,consultaCowayengineerforthedetailed
installationmethods.
Theremaybesomewaterremaininginsideofthelterwhichwasusedtotestthe
productduringinspectionprocessatthefactory.
Pleasefeelateasyanduseasitisn’ttheusedproduct.
Don’treusethemainwatersupplyvalveandhosethatwaspreviously
usedwhenyouinstalltheproduct.
Tips
WQA Approved NSF/ANSI 42/53/58 MH 01/24/2011