18
Maintenance
FILTER REPLACEMENT / FILTER REPLACEMENT METHOD
FILTER REPLACEMENT METHOD
1.  Close water lead-in valve and pull out plug.
2.  Unfasten screws. Then, hold both side covers at the bottom and force them 
upwards as if pushing up to remove them from the main body. 
3.  Remove tting from lter as shown in diagram. Replace lters as required. 
Take caution for safety at all times.
Don’tpullthecup-touchleverwiththeexcesspower.
Otherwise,theproductmaybreak.
Tips
FilterreplacementtimeisindicatedwhenthecorrespondingLEDoflterickersinwindow
display.
WQA Approved NSF/ANSI 42/53/58 MH  01/24/2011