Coway P-07FR - FILTER REPLACEMENT METHOD: Reset and Reassembly; Filter Reset and Reassembly Process; Filter Mounting and Cleansing Tips; TROUBLESHOOTING

19
FILTER REPLACEMENT METHOD
4. Initialize lter setting by pressing the corresponding button (for 3 sec) of
lter among the lter reset buttons located at the back of the front panel.
5. Insert both side covers and fasten screws and plug the power cord into
outlet.
Check for normal operation of lter replacement parts in window display.
Pleasebesuretousethenewlteraftercleansing.
- Neo-senselter:PleaseassembleaftercleansingwithNeo-senselterforabout
30seconds.
- Plussedimentlter:Pleasemountitaftercleaningwiththemainwaterforabout
3minutes.
- Pre-carbon/Postcarbonblock/Inno-senselter:
Pleasemountaftercleansingwiththewaterpassedtheplussedimentlterfor
about3minutes.
- Membranelter(RO):Pleasemountaftercleansingwiththewaterpassedthe
plus-sedimentlterandthepre-carbonlterforabout3
minutes.
Tips
WQA Approved NSF/ANSI 42/53/58 MH 01/24/2011