INSTALLING BATTERIES
1. On the back of the remote control, push the tab
and lift off the battery cover.
2. Obtain two (2) fully-charged AA alkaline bat-
teries. Match the + and – marks on the batter-
ies to the + and – marks in the battery case,
then insert the new batteries.
3. Align the cover’s keys with the case’s holes and
press the cover back into place. The tab should
click when the cover is locked.
4. Test the unit by pressing POWER and any
mode key (e.g., AUX,VCR,TV,or CABLE). If the
batteries are inserted correctly, the selected
mode key will blink once.
NOTE: Whenever batteries need replacement, the remote control
will cease to operate. Simply replace the batteries and the remote
control will be restored to its full functionality, complete with your
favorite settings.
7
To Next Page
Loading...
Need help?
General
