2.5 Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time,
channel name and window No. If you want to change system date and time, you can refer to
general settings (Main Menu Setting System General). If you want to modify the
channel name, please refer to the display settings (Main Menu Camera CAM name)
Tips
Preview drag: If you want to change position of channel 1 and channel 2 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 2,
release mouse you can switch channel 1 and channel 2 positions.
Use mouse middle button to control window split: You can use mouse middle button to
switch window split amount.
Please note you cannot switch position of one analog channel and one digital channel.
Preview Control
The preview control function has the following features.
Support preview playback.
In the preview desktop, system can playback previous 5-60 minutes record of
current channel. Please go to the Main Menu->General to set real-time playback
time.
Support drag and play function. You can use your mouse to select any playback start time.
Support playback, pause and exit function.
Right now, system does not support slow playback and backward playback function.
Support digital zoom function.
Support real-time backup function.
You can follow the contents listed below for the operation instruction.
Preview control interface
Move you mouse to the top center of the video of current channel, you can see system pops
up the preview control interface. See Figure 2-19. If your mouse stays in this area for more
than 6 seconds and has no operation, the control bar automatically hides.
Figure 2-20
To Next Page
Loading...
